A factory prepared blend of carefully selected raw materials, cement and graded fillers, it is designed for use with water and aggregate to produce high strength, water retaining and self-curing screed for interior and exterior floor applications.it meets and exceeds the requirements of national and international standards.
Dry Wall Adhesive
It is a polyurethane adhesive designed for the installation of glass mosaic tile, ceramic tile, vitrified tile and natural stone on most drywall boards and clean dry cement based surfaces. DRY WALL ADHESIVE is a factory made pail consisting of pre-blended single component adhesive which is ready to use.
For commercial and residential installations of ceramic tile, vitrified tile and natural stone over most drywall boards and clean cement based surfaces. Used where installations must resist physical abuse, shock, and mild chemicals. (Interior & Exterior)
Single component / ready to use high bond strength No on-site mixing fast installation - saves time economical can be used on various dry wall boards.
Suitable substrates :
Concrete* cement mortar beds plywood gypsum wall board calcium silicate board bison panel board concrete masonry* cement plaster* AAC block masonry* cement terrazzo* cement backer board** exiting ceramic tile Other resilient tile and stone.
* All cement based surfaces should have been cured as per standard practices and shall be dry for tilling.
** Consult cement backer board manufacturer for specific installation recommendation and to verify
NOTE : Not for use on metal & plastic substrates and metal tiles.
Color : Off White
Coverage : Approx 58 sq.ft. per 20kg unit with a 1/4" 1/4" (6mm × 6mm) square notch trowel.
Packaging : 5ltr. Bucket
Certification : ANSI : A 118.4 & ANSI 136.1 EN:D2TE VOC: Very Low